Simple Steps To Set Up Router With out Cd Or Any Application

Connect withthe webWhy do you need router?

Router is really a method allowing greater than 1 computer to access the Internet at the same time. You could connect 1 computer to the modem and utilize Online on that computer. What about the second computer? Modem will allow just one pc to access the net. You need a router.
1) Set up main computer to access the Online using the router:

Find out how to construct the router with out CD or program?
As explained earlier, the modem will allow only one pc to access the Internet. There are different authentication systems used by modem to allow Internet access. To set up the router you have to know the authentication types. Once you understand the concept of authentication, you will be able to set up the router. All the routers have web dependent set up interface also called as set up page. You need to open the set up page of the router.
Set up router for Cable ISP:
In case of Cable Internet service, ISP will register the MAC address from the main pc for the authentication. The modem will allow only the main computer to access the Internet. When you connect the main computer to the modem, will detect the MAC address of that computer and it ll grant the permission to access the Internet. In order to set up the router for Cable Internet service, you require to clone the MAC address of the main pc. Connect the modem and the main computer to the router. Open the set up page of the router. Clone the MAC address of the pc. You may be great to go on the main pc.
Set up router for DSL connection:
In case of DSL Internet service, ISP offers you user name and password for authentication. Connect the modem and pc to the router. Open the set up page of the router. Set the Internet connection type to PPPoE. Enter the user name and password and save the settings. Your router is good to go. The web connection type will be DHCP.
2) Set up wireless network:
The main computer is able to access the Internet through the router. You've the set up page opened. Now you will need to change the wireless settings of the router. SSID is your name of this wireless. Change the wireless network name. Enable the wireless security on the router. Write down the SSID and the wireless security key / password.
3) Connect to the wireless network:
You recognize the wireless network name and the security key. Look for the wireless network with your wireless computer. Select your network from the list and try to connect. It will ask you for the key. Just enter the key and it ll connect to the wireless network. Enjoy the Internet on the wireless computer.
The procedure to connect to the wireless network will be distinctive for different operating systems. There is wireless network connection for windows XP computer. For Windows Vista and Windows 7 there is Network and sharing center. Airport is for MAC os. Should you have Linksys wireless adapter on your computer then you will utilise Linksys wireless monitor to hook up with the wireless network. In case of windows XP, you need to use either windows utility or manufacturer's utility.
Leading place to position the wireless router:
It s endorsed you should not place your router close to the microwave or fridges. Avoid putting radio transmitting / receiving devices near metal objects, as the metal gets in the way of the signal. Keep it at least 1 foot away from the wall and three feet above the ground. Do not keep it under the desk. Keep it above the desk.

1 comment:

  1. I read your blog article; I am very impressed after reading your blog. Really your job is very helpful for me. Have nice day…AvriqAvriq India


Powered by Blogger.